Window Cling L0-WC013

Windows Across from Room 007A

Available

SUGGESTED MATERIAL
Tru-Cling/Clear Cling

AVAILABLE SURFACES
Single or Double Sided

ESTIMATED INSTALLATION LABOR
2 men 1 hour

ESTIMATED DISMANTLE LABOR
2 men 1 hour

NOTES

GRAPHIC A NEEDS TO BE PRINTED IN TWO PIECES AND A 0.25" OVERLAP ADDED FOR REGISTRATION OF DESIGN DURING INSTALLATION. HEIGHT DIMENSIONS MAY BE ADJUSTED PER DESIGN AND OR PRINTER LIMITATIONS.

MUNTINS ARE 2.5"

EQUIPMENT:? 2- 8’ LADDER

TOOLS:? SQUEEGEE, ?DISH SOAP, SPRAY BOTTLE, WATER, ?PAPER TOWELS?, WINDEX

DIRECTIONS: ?MIX COLD WATER AND EIGHT DROPS OF DISH SOAP IN A SPRAY BOTTLE AND SHAKE SOLUTION WELL. IF NEEDED, CLEAN SURFACE OF GLASS WITH WINDEX AND TOWEL FIRST. NEXT, SPRAY GLASS AND GRAPHIC WITH A LIBERAL AMOUNT OF SOLUTION BEFORE APPLYING GRAPHIC TO THE GLASS. LINE UP AND LEVEL OUT GRAPHIC ON GLASS. USE SQUEEGEE TO REMOVE SOLUTION FROM IN BETWEEN GRAPHIC AND GLASS. WIPE THE GRAPHIC CLEAN OF SOLUTION RESIDUE BEFORE MOVING TO NEXT JOB.

DOWNLOAD FILE

  • Window Cling L0-WC013

Window Clings Opportunities

Every effort has been made to ensure the accuracy of all information contained on this photo. However, no warranties, either expressed or implied, are made with respect to this photo. If the location of building columns, utilities or other architectural components of the facility is a consideration in the construction or usage of a graphic element it is the sole responsibility of the client to physically inspect the facility to verify all dimensions and locations.