Window Cling L1-WC101

Market Street Outside East Entrance

Available

SUGGESTED MATERIAL
Inside use: ?Tru-Cling/ClearCling ?– Outside use: ControlTac

SUGGESTED CONSTRUCTION
Print graphic in multiple pieces with an overlap if using ControlTac material.? Print graphic in one solid pieces if using Tru-Cling or ClearCling material

AVAILABLE SURFACES
Single or Double Sided

ESTIMATED INSTALLATION LABOR
2 men 2 hours

ESTIMATED DISMANTLE LABOR
2 men 2 hours

NOTES

TOOLS:? SQUEEGEE, DISH SOAP, ?SPRAY BOTTLE, WATER, ?PAPER TOWELS?, WINDEX

EQUIPMENT: ?1- SCISSOR LIFT

MIX COLD WATER AND EIGHT DROPS OF DISH SOAP IN A SPRAY BOTTLE AND SHAKE SOLUTION WELL. IF NEEDED, CLEAN SURFACE OF GLASS WITH WINDEX AND TOWEL FIRST. NEXT, SPRAY GLASS AND GRAPHIC WITH A LIBERAL AMOUNT OF SOLUTION BEFORE APPLYING GRAPHIC TO THE GLASS. LINE UP AND LEVEL OUT GRAPHIC ON GLASS. USE SQUEEGEE TO REMOVE SOLUTION FROM IN BETWEEN GRAPHIC AND GLASS. WIPE THE GRAPHIC CLEAN OF SOLUTION RESIDUE BEFORE MOVING TO NEXT JOB.

  • Window Cling L1-WC101

Window Clings Opportunities

Every effort has been made to ensure the accuracy of all information contained on this photo. However, no warranties, either expressed or implied, are made with respect to this photo. If the location of building columns, utilities or other architectural components of the facility is a consideration in the construction or usage of a graphic element it is the sole responsibility of the client to physically inspect the facility to verify all dimensions and locations.