Window Cling L1-WC129

West Registration Area / Right of Escalators up to Meeting Room Level

Available

SUGGESTED MATERIAL
Tru-Cling/Clear Cling

AVAILABLE SURFACES
Single or Double Sided

ESTIMATED INSTALLATION LABOR
2 men 3 hours

ESTIMATED DISMANTLE LABOR
2 men 3 hours

NOTES

THE MUNTINS ARE 2.5"WIDE.

THESE WINDOWS HAVE OLD TINT ON THE INSIDE AND SHOULD BE HANDLED WITH CARE WHEN INSTALLING AND TEARING OUT GRAPHIC.

EQUIPMENT:? SCISSOR LIFT

TOOLS:? SQUEEGEE, ?DISH SOAP, ?SPRAY BOTTLE, WATER?, PAPER TOWELS, ?WINDEX

DIRECTIONS:? GRAPHICS WERE DESIGNED WITH A .25" OVERLAP. USE IT! ?MIX COLD WATER AND EIGHT DROPS OF DISH SOAP IN A SPRAY BOTTLE AND SHAKE SOLUTION WELL. IF NEEDED, CLEAN SURFACE OF GLASS WITH WINDEX AND TOWEL FIRST. NEXT, SPRAY GLASS AND GRAPHIC WITH A LIBERAL AMOUNT OF SOLUTION BEFORE APPLYING GRAPHIC TO THE GLASS. LINE UP AND LEVEL OUT GRAPHIC ON GLASS. USE SQUEEGEE TO REMOVE SOLUTION FROM IN BETWEEN GRAPHIC AND GLASS. WIPE THE GRAPHIC CLEAN OF SOLUTION RESIDUE BEFORE MOVING TO NEXT JOB.

  • Window Cling L1-WC129

Window Clings Opportunities

Every effort has been made to ensure the accuracy of all information contained on this photo. However, no warranties, either expressed or implied, are made with respect to this photo. If the location of building columns, utilities or other architectural components of the facility is a consideration in the construction or usage of a graphic element it is the sole responsibility of the client to physically inspect the facility to verify all dimensions and locations.