Escalator Graphics L1-EG107

Exhibit Hall 2 / Up to Meeting Room Level

Available

SUGGESTED MATERIAL
Tru-Cling/Clear Cling

SUGGESTED CONSTRUCTION
Print graphic on one solid piece

SUGGESTED SIZE
26"W x 44’-6"H

AVAILABLE SURFACES
Single Sided

ESTIMATED INSTALLATION LABOR
4 Men / 2 Hours

ESTIMATED DISMANTLE LABOR
4 Men / 2 Hours

NOTES

THE INSIDE GLASS IS NOT AVAILABLE FOR BRANDING.

THERE ARE 11 STRAIGHT GLASS PANELS ON EACH RAIL FOR A TOTAL OF 44 PANELS.

TOOLS: ?SQUEEGEE, ?DISH SOAP?, SPRAY BOTTLE, WATER?, PAPER TOWELS, ?WINDEX

DIRECTIONS:? MIX COLD WATER AND EIGHT DROPS OF DISH SOAP IN A SPRAY BOTTLE AND SHAKE SOLUTION WELL. IF NEEDED, CLEAN SURFACE OF GLASS WITH WINDEX AND TOWEL FIRST. NEXT, SPRAY GLASS AND GRAPHIC WITH A LIBERAL AMOUNT OF SOLUTION BEFORE APPLYING GRAPHIC TO THE GLASS. LINE UP AND LEVEL OUT GRAPHIC ON GLASS. USE SQUEEGEE TO REMOVE SOLUTION FROM IN BETWEEN GRAPHIC AND GLASS. WIPE THE GRAPHIC CLEAN OF SOLUTION RESIDUE BEFORE MOVING TO NEXT JOB.

  • Escalator Graphics L1-EG107
DIMENSIONS
Dimension not to scale.

Escalator Graphics Opportunities

Every effort has been made to ensure the accuracy of all information contained on this photo. However, no warranties, either expressed or implied, are made with respect to this photo. If the location of building columns, utilities or other architectural components of the facility is a consideration in the construction or usage of a graphic element it is the sole responsibility of the client to physically inspect the facility to verify all dimensions and locations.