Escalator Runner L0-ER002

Across from Meeting Room 008A

Available

SUGGESTED MATERIAL
PAPER GRAPHIC WITH 3M CONTROL TAC ADHESIVE ENDS

SUGGESTED CONSTRUCTION
PRINT ONE SOLID GRAPHIC PER RUNNER / ?APPLY 24" OF CONTROL TAC TO EACH END OF RUNNER

SUGGESTED SIZE
54’W x 5.75"H

AVAILABLE SURFACES
Single Sided

ESTIMATED INSTALLATION LABOR
2 men 1 hour

ESTIMATED DISMANTLE LABOR
1 man .50 hour

NOTES

TOOLS:? SQUEEGEE, ?DISH SOAP, ?SPRAY BOTTLE, WATER, ?PAPER TOWELS?, WINDEX

DIRECTIONS:? BEFORE APPLYING, ?REMOVE ANY OILY RESIDUE IN AREA WHERE ADHESIVE APPLIES TO METAL.? ?IF RUNNER IS WRINKLED WHEN PULLED FROM PACKAGING, PEEL ENTIRE BACKING AND STICK ENTIRE RUNNER TO METAL.? IF RUNNER IS NOT WRINKLED, YOU NEED ONLY TO PEEL 2 FEET OF BACKING OFF OF EACH END TO STICK TO METAL.

DOWNLOAD FILE

  • Escalator Runner L0-ER002
DIMENSIONS
Dimension not to scale.

Escalator Graphics Opportunities

Every effort has been made to ensure the accuracy of all information contained on this photo. However, no warranties, either expressed or implied, are made with respect to this photo. If the location of building columns, utilities or other architectural components of the facility is a consideration in the construction or usage of a graphic element it is the sole responsibility of the client to physically inspect the facility to verify all dimensions and locations.