Escalator Graphics L2-EG203

Park View Lobby up to Hemisfair Ballroom

Available

SUGGESTED MATERIAL
3M Control Tac

SUGGESTED CONSTRUCTION
Print graphic on one solid piece

SUGGESTED SIZE
42’-2.125"W x 69"H

AVAILABLE SURFACES
Single Sided

ESTIMATED INSTALLATION LABOR
4 men 4 hours

ESTIMATED DISMANTLE LABOR
4 men 4 hours

NOTES

THE INSIDE STEEL IS NOT AVAILABLE FOR BRANDING.

GRAPHIC ?DIMENSIONS:? 42’W x 69"H

EQUIPMENT: ?1- SCISSOR LIFT ?1- 6’ LADDER

TOOLS:? SQUEEGEE, ?DISH SOAP, ?SPRAY BOTTLE, WATER, ?PAPER TOWELS?, WINDEX

DIRECTIONS:? BEFORE APPLICATION,?USE THE WINDEX TO REMOVE ANY OILY RESIDUE ON METAL. THIS WILL INSURE ADHERENCE.?MIX COLD WATER AND EIGHT DROPS OF DISH SOAP IN A SPRAY BOTTLE AND SHAKE SOLUTION WELL. IF NEEDED, CLEAN SURFACE OF GLASS WITH WINDEX AND TOWEL FIRST. NEXT, SPRAY GLASS AND GRAPHIC WITH A LIBERAL AMOUNT OF SOLUTION BEFORE APPLYING GRAPHIC TO THE GLASS. LINE UP AND LEVEL OUT GRAPHIC ON GLASS. USE SQUEEGEE TO REMOVE SOLUTION FROM IN BETWEEN GRAPHIC AND GLASS. WIPE THE GRAPHIC CLEAN OF SOLUTION RESIDUE BEFORE MOVING TO NEXT JOB.

  • Escalator Graphics L2-EG203
DIMENSIONS
Dimension not to scale.

Escalator Graphics Opportunities

Every effort has been made to ensure the accuracy of all information contained on this photo. However, no warranties, either expressed or implied, are made with respect to this photo. If the location of building columns, utilities or other architectural components of the facility is a consideration in the construction or usage of a graphic element it is the sole responsibility of the client to physically inspect the facility to verify all dimensions and locations.